Description
👍[Dual-Frequency Autel MX-Sensors]👍 Autel TPMS sensors support both 315 MHz and 433 MHz frequencies, eliminating the need to distinguish which frequency your vehicle's sensors use. MX-Sensors offer performance equivalent to or even surpassing OEM sensors in terms of signal strength, durability, and functionality. AUTEL MX-Sensor is 100% cloneable. The package comes with 4pcs Autel metal MX-Sensor.
👍[99% Vehicle Coverage]👍 This Autel MX sensor is a user-friendly and cost-effective essential for any shop performing TPMS maintenance. Autel's sensor inventory solution offers 99% vehicle coverage, eliminating the need for distributors to carry hundreds of sensors to fulfill shop orders. At the workshop level, just one Autel sensor can service nearly all TPMS-equipped vehicles, translating to lower repair costs and higher installation efficiency.
👍[Wireless TPMS Programming]👍 Exceptional sensor signal strength makes Autel 1-Sensor easy to program wirelessly, even when the sensor is already installed on the wheel. Thanks to its strong signal strength, Autel's latest TPMS tools can now program up to 16 sensors in a single session. AUTEL MX-Sensor is 100% cloneable. When the MX-Sensor is cloned with the original sensor ID using AUTEL TPMS tools and placed in the same location, there is no need for relearning.
👍[Outstanding Reliability and Ultra-Lightweight]👍 Utilizing premium materials and advanced TPMS technology, AUTEL MX-Sensor delivers exceptional battery life and reliability to match the performance of OE sensor batteries. The 1-Sensor body weighs only 11 grams, significantly lighter than most sensors on the market, ensuring better sensor stability and performance.
👍[Compatible with Autel TPMS Scan Tools]👍 This Autel MX sensor can be used with Autel TPMS tools such as TS408, TS508, TS508WF, TS608, and more. Autel MX sensors can also be used with Autel scanners featuring professional TPMS functions, including Autel MK808TS, MK808Z-TS, MP808TS, MP808Z-TS, ITS600, MS906TS, MS906 Pro-TS and etc.
Package Dimensions : 7.36 x 4.96 x 2.48 inches; 4.97 Ounces
Date First Available : May 13, 2021
Manufacturer : Autel
This package includes 4pcs of Autel 1-Sensors.
The JXZ BT101 Battery Tester can perform Charging Test, Voltage Test and Cranking Test for 12V battery, 100-2000CCA. It has the same functionality like Autel BT506.
All sensors are imprinted a series number on the body for assuring quality control.
Customers could read the series number by Autel TPMS tool or see the number directly on the sensor.
Sensor Installation Process:
1.Loosening the tire: Remove the valve cap and core and deflate the tire. Use the bead loosener to unseat the tire bead.
2.Dismounting the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead.
3.Dismounting the sensor: Remove the screw nut from the valve stem, and then remove the sensor assembly from the rim.
4.Mounting sensor and valve: Connect the sensor body and valve stem at a suitable angle (normally use the maximum angle of 30 degrees) and tighten the screw.
5.Remove the screw nut from the valve stem.
6.Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim.
7.Tighten the screw-nut with 4.0 mm with the help of the positioning pin.
8.Mounting the tire: Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Reviews
There are no reviews yet.